Lithionics Battery System

Why Lithionics?

Safety

Lithionics Battery® uses an organic Lithium-ion Iron Phosphate chemistry in all of our lithium battery models. This naturally safe chemistry is paired with an internal shut down curtain technology inside each lithium cell, preventing any flame or explosion from thermal runaway events. During use, the NeverDie® Battery Management System is continually monitoring each lithium cell every second to ensure the safest operation of your system. Lithionics Battery’s safety technology has been validated by third party accredited facilities such as Underwriter Laboratory for UL listing and MGA Research Corporation for UN DOT compliance. These agencies certify that our Lithium-ion Iron Phosphate battery systems with our NeverDie® Battery Management System technology remains safe even under extreme test conditions.

NeverDie® Battery Management System

Lithionics Battery’s NeverDie® Battery Management System is a proprietary design featuring protective safety features, as well as status and state-of-charge monitoring. The NeverDie® Battery Management System is standard on all Lithionics Battery® systems to ensure your lithium batteries are operated within their rated specifications. This increases the lifespan of your battery system and protects your valuable investment. Unlike many competitors which offer lower quality MOSFET based BMS designs, Lithionics Battery® uses heavy duty contactors for BMS on/off switching controlled by a custom microprocessor. This allows for continuous current ratings of up to 400A to match the high performance of your lithium battery module.

Modularity, Expand-ability, Flexibility

With Lithionics Battery’s NeverDie® Battery Management System with OptoLoop® technology, a single external Battery Management System can monitor multiple batteries in series or parallel connection. This allows a flexible system design and the ability to expand battery capacity in the future. For example, with our Plug & Play parallel combiner box, you can start with just 1 battery module, and simply plug in additional battery modules as needed. With a variety of battery module sizes and capacity options, Lithionics Battery® can recommend a selection of system configurations to meet your needs.

Plug & Play – Ready to Use

Lithionics Battery® recommends the use of our Plug & Play connector systems for quick and safe installation of our battery systems. The Plug & Play system features our parallel combiner box for parallel connections, or a series wire harness for series connections. The Plug & Play connector system reduces the risk of short circuit or mis-wiring during installation, and allows you to quickly connect or disconnect your system in minutes. Lithionics Battery® manufactures our wire harness and combiner box systems in-house to the recommended crimp and connection standards and fully tests all connections alongside your battery system for quality assurance.

MODEL NUMBER: GTX12V630A-E2112-CS200-UL

OEM Model/UL1973/RVIA Compliant, Requires the Use of Our BMS-Controlled Magnetic-Hydraulic UL Listed Circuit Breaker

ENERGY:

630 AMP HOURS

PULSE AMPS: 1200 (1 second)

8064 WATT-HOURS

INTERNAL NEVERDIE® BMS FEATURES:

NeverDie® Power Reserve (Spare Fuel) for Hotel Loads and Engine Cranking

Over-Charge, Over-Discharge and Short-Circuit Protection (LVC, HVC, SCC)

Low/High Temperature Charge/Discharge Protection

Internal Heating Kit: Permits Charging as low as -20C/-4F

Pushbutton On/Off switch for Safety and Storage

Battery Gauge and Status Codes for Health Monitoring

Bluetooth wireless telemetry with Lithionics Battery iOS and Android app

CANbus telemetry in the RVIA RV-C format (M12)

An alternator Field Control Circuit (FCC) (AMPSEAL8) Remote LED illuminated On/Off Power switch (AMPSEAL8)

$8,499.00

(includes shipping)